Can I purchase a new Triggertech Trigger for my previous production Mark V?

Yes, Triggertech triggers are available aftermarket to consumers for purchase. For warranty purposes, they must be installed by Weatherby or a Weatherby Authorized Service Center. The price is $225 Installed, which includes the Trigger at $159.99 MSRP. For the warranty of the rifle to be intact, the trigger must be purchased through and installed by…

How do I adjust the TriggerTech pull on my Mark V rifle?

The MARK V® Triggertech trigger assembly has a pull weight adjustment screw. The adjusting screw is located on the bottom of the trigger assembly and adjusts the weight of the trigger pull. The trigger is adjustable down to a weight of 2.5 lbs. If the screw is removed completely, the trigger will maintain a minimum…

How do I adjust the LXX trigger pull on my Mark V rifle?

The MARK V® trigger assembly has a pull weight adjustment screw. The adjusting screw on the bottom of the trigger assembly adjusts for the weight of the trigger pull, and is for your use. The LXX trigger is adjustable down to a weight of 2.5 lbs. when the screw is fully backed out and not…

What are the torque specifications for my Talley Bases/Rings?

Lightweight rings: 17-20 in/lb on ring screws. Steel fixed rings: 30 in/lb bottom screw, 20 in/lb top screw. Steel screw lock detachable and quick release ring: 6-48 bottom screws 30 in/lb, 10-32 screw 35 in/lb, top screws 20 in/lb. Steel Bases: 20-25 in/lb  

Where can I find a Weatherby Authorized Service Center?

The following list is every Weatherby Authorized Service Center, as well as their contact information. Prior to sending any rifle or shotgun for work, please contact them to inquire about their services as well as current lead times for any particular work you are looking to have done. Weatherby Authorized Service Centers operate independently of…

Can I send my rifle back to Weatherby to have an Accubrake installed?

There are Weatherby-authorized Accubrake® and Accubrake® ST installation centers located across the United States. You can have an Accubrake® installed on your rifle at any one of these centers or in the Weatherby Custom Shop in Sheridan, WY. The work done by these centers is the same as would be done by the factory and…

Does Weatherby recommend specific ammunition for each caliber to get the best accuracy?

223 Remington Winchester 45gr Jacketed Hollow Point (USA22322) Federal 55gr Nosler Ballistic-Tip (P223F) Barnes Vortex 55gr TSXFB (21520) 22-250 Remington Barnes 50gr Vortex TSX (22008) Winchester 45gr Hollow Point (USA222502) Federal 55gr Soft Point (22250A) 243 Winchester Barnes Vortex 80gr TTSX (21522) Federal 80gr Soft Point (243AS) Federal 100gr Soft Point (243B) 240 Weatherby Magnum…