Accubrake is sized for both Barrel Contour and Barrel Length.
Please review your specific product barrel contour and length HERE for appropriate sizing.
Threaded 1/2×28 / All brakes are .30 Caliber and under.
Accubrake ST – Mark V
$59.00
Description
WARNING:
60-DAY LEAD TIME
NO RETURNS OR REFUNDS ON BRAKE PURCHASES
NON-WEATHERBY GUNSMITH BARREL THREADING VOIDS ACCURACY GUARANTEE & BARREL WARRANTY.
Accubrake is sized for both Barrel Contour and Barrel Length.
Please review your specific product barrel contour and length HERE for appropriate sizing.
Threaded 1/2×28 / .30 caliber and below
WARNING:
NO RETURNS OR REFUNDS ON BRAKE PURCHASES
NON-WEATHERBY GUNSMITH BARREL THREADING VOIDS ACCURACY GUARANTEE & BARREL WARRANTY.
ATTACHING THE ACCUBRAKE ST
1. Open the bolt, clear the chamber and magazine of all ammunition.
2. Remove the thread protector (if installed).
3. Hand screw the muzzle brake on the barrel until snug.
4. Insert a 1/8” allen wrench through the holes and rotate the brake clockwise until it is secured tightly to the barrel
DETACHING THE ACCUBRAKE ST
1. Open the bolt, clear the chamber and magazine of all ammunition.
2. Insert a 1/8” allen wrench through the holes and rotate the brake counterclockwise until loose.
3. Remove the tool and unscrew the muzzle brake by hand.
4. Install thread protector until snug. Hand tighten only, do not use any tool to tighten the thread protector
CAUTION:
THREADED OBJECTS HAVE A TENDENCY TO LOOSEN UNDER RECOIL. CLEAR THE CHAMBER AND MAGAZINE OF ALL AMMUNITION, THEN USE ASSEMBLY TOOL TO CHECK FOR TIGHTNESS OF BRAKE BEFORE SHOOTING AND AFTER EACH 5 SHOTS.
ALWAYS WEAR SUITABLE HEARING PROTECTION WHEN FIRING A RIFLE WITH A MUZZLE BRAKE INSTALLED AS NOISE LEVELS ARE INCREASED. ALWAYS MAKE SURE NO ONE IS NEAR THE BARREL, AS BLAST TO ALL SIDES CAN BE SEVERE.
MUZZLE DEVICES ARE CALIBER SPECIFIC. INSTALLING A SMALLER CALIBER BRAKE ON A LARGER CALIBER RIFLE WILL CAUSE DAMAGE TO THE BRAKE AND POSSIBLE PERSONAL INJURY. REFERENCE THE TABLE TO ENSURE APPROPRIATE BRAKE/MUZZLE FIT.
Additional information
| Weight | 4 oz |
|---|---|
| Dimensions | 4 × 5 × 6 in |
| Barrel Length & Contour | |
| Accubrake Color | Accubrake ST Burnt Bronze, Accubrake ST Cobalt, Accubrake ST Tac Grey |
Chris Walker –
I installed one of these on a Mark V Hunter in .308. Not that you need a brake on one of these guns, but it is only six pounds without scope. I zeroed it while I was waiting on the brake. It was low to moderate at best recoil. Got it sighted in quickly, then shot it again with the brake. What a difference. It now feels like shooting a .243 or maybe even a .223. I could shoot it all day. Very pleased with this brake and the fit and finish is impeccable. Normal Weatherby stuff.
Larry (verified owner) –
I recently purchased a Weatherby Mark V Hunter 7mm. Rem mag. I shot it three times without the Accubrake ST, the recoil was average for a 7mm. Then I attached the Accubrake ST. It was amazing how much it reduced the recoil! It fit perfectly and looks great. I would highly recommend this product! As with all Weatherby rifles and accessories it is high quality,
Dakota Wilson (verified owner) –
7mm Rem isn’t enough recoil to really need a brake but this definitely makes it more pleasant. It cut enough recoil that I would have no problem letting my wife shoot it instead of her 6.5 CM if the situation called for it. Everybody shoots better with less recoil, just get one.
Preston –
I cannot recommend this enough. 300 Weatherby definitely has a bite to it, manageable but not enjoyable. I broke and sighted my Mark V in without the muzzle brake and was left with a sore and bruised shoulder. After I decided to purchase this muzzle brake, I can barely feel the recoil. I felt like this had even less recoil than my 7mm-08. It also fits the rifle perfectly, as you’d expect. Overall, I couldn’t be happier.