Mark V® Backcountry Guide Ti

$3,799.00

Starting at just 5.1 lbs, the Mark V® Backcountry™ Guide Ti was purpose-built to be the best lightweight mountain rifle on the market. It features Peak 44’s Blacktooth carbon fiber stock with Spartan Precision’s gunsmithing adapters factory installed. These adapters allow hunters to utilize Spartan’s ultra-lightweight accessories. Equipped with an Accubrake ST and 3DHex recoil pad, the Backcountry Guide series manages recoil extremely well even with Weatherby’s historic magnum cartridges. The titanium action has an incredible strength-to-weight ratio cutting even more weight than the standard steel action. The Guide series utilizes shorter BSF Carbon Fiber barrels making it easier to run suppressors and navigate in thick, rugged terrain.

FINISH

Carbon Barrel – BSF Carbon Barrel
Fluted Barrel / Trigger Guard / Bolt / Bolt Knob / Safety – Graphite Black Cerakote
Stock – Peak 44 Blacktooth Exposed carbon fiber with carbide black sponge pattern accents

TECH SPECS

View Tech Specs

SKU: MGT Categories: , Tag:

Description

SPECIFICATIONS

Cut ounces, not corners. The best lightweight rifle on the market.

At the heart of the Backcountry Guide Ti is the Mark V titanium action. Titanium offers an incredible strength-to-weight ratio and significantly cuts weight when compared to actions using traditional steel material. Titanium is also naturally corrosion-resistant which makes it perfect for hunting in harsh hunting conditions. All of Weatherby’s titanium actions are machined in Sheridan, WY with the tightest tolerances and attention to detail.

The Backcountry Guide series features Peak 44’s Blacktooth Stock. The forend of this stock integrates two Spartan Precision gunsmithing adapters for seamless compatibility with their ultra-light accessories. The stock’s 3DHex recoil pad was designed to tame even the largest of Weatherby’s magnum cartridges. As recoil is absorbed into the pad’s honeycomb structure, the hexagonal voids begin to collapse and disperse the recoil’s energy turning that sharp kick into a gentle shove. Each stock is hand-painted to give it a one-of-a-kind look on every rifle.

The deep spiral-fluted bolt design cuts weight and reduces the overall bearing surface area of the bolt resulting in a smoother more reliable bolt cycle.

The Backcountry Guide series comes with a shorter BSF barrel and the threaded muzzle comes with a machined titanium Accubrake ST. (⅝-24)

The Backcountry Guide comes with an adjustable TriggerTech trigger to give you the ability to fine tune the pull weight of your trigger.

BCGuideTi_FeatureVideoPlaceholder_Thumbnail-1000×520

LEARN MORE

Episode 99 - Backcountry Guide Series: The Best Lightweight Mountain Rifle
On Our Mark Podcast

Episode 99 - Backcountry Guide Series: The Best Lightweight Mountain Rifle

Built on the legendary Mark V action, we purpose-built the Guide series to offer custom features in a production rifle. We are proud to introduce the Mark V® Backcountry™ Guide and Guide Ti.

LISTEN NOW

BSF CARBON FIBER BARREL

THE PINNACLE OF CARBON BARRELS

BSF Barrels use carbon fiber in a way that no other carbon barrel manufacturer does, leading to unmatched accuracy and heat dispersion properties.

TENSIONED BARREL

After BSF turns down a 416R stainless steel match barrel they sleeve it with carbon fiber and load it under tension. Because it’s under tension, as the barrel heats up it keeps the rifling straighter, resulting in a stiffer, more rigid barrel. Most competitors use a wrapping method that has been proven to trap heat and cause delamination.

COOLER BARREL - CONSISTENT GROUPS

With BSF’s proprietary method, 95% of the carbon fiber does not touch the contoured barrel, creating air gaps and allowing air to foil around the steel and cool the barrel faster. The high quality carbon fiber is designed to move at the same expansion rate as the 416R stainless steel resulting in a vibration dampening effect. What does that mean? It means the carbon fiber absorbs the shock and vibration allowing more consistent groups.

SPARTAN PRECISION

GUNSMITH ADAPTERS

THE ULTIMATE IN DISCRETE LIGHTWEIGHT ATTACHMENT SYSTEMS

Spartan Precision’s Gunsmith Adapters are designed for hunters who want the ultimate in lightweight attachment systems. The gunsmith adapters feature the MagnaSwitch™ Attachment System that uses rare earth magnets to quickly and securely swap your bipods. These are featured within the Peak 44 Blacktooth stock on the Mark V Backcountry Guide.

FEATURES

Guaranteed Sub-Moa Accuracy

All Mark V® rifles are guaranteed to shoot a 3-shot group of .99” or less at 100 yards (SUB-MOA) from a cold barrel when used with Weatherby® factory or premium ammunition within Two-Years of Verified Purchase Date to Original Purchaser.

TriggerTech Trigger

TriggerTech’s trigger provides true zero-creep break, extremely short over-travel, and is externally adjustable. Precision cut stainless steel components ensure consistent trigger pulls from shot to shot in a safe, reliable, and corrosion resistant package.

Accubrake ST

By adding an Accubrake ST you will significantly reduce felt recoil up to 53%. Available in four different barrel diameters, with thread protector, for a perfect brake-to-barrel contour.

54 Degree Bolt

The shortest in the industry (as compared to typical 90 bolt throw). Allows for faster chambering on follow-up shots and greater bolt-to-scope clearance.

Titanium Receiver

Titanium properties present 42% the weight of traditional steel which provides maximum weight savings for the hunter looking to save every ounce while maintaining structural integrity.

Deep Fluted Bolt

A larger radius, deeper flute not only trims a bit more weight from the bolt body of the Mark V, it also increases the smoothness with which the bolt can be cycled.

Removable Bolt Knob

Allowing for customization and utility, the bolt handle of the Mark V is now threaded to accept a variety of bolt knobs

Carbon Fiber Stock

Sourced from Peak 44, this stock has the distinction of being the lightest production aerospace-grade carbon fiber stock on the market. Industry-leading manufacturing techniques, patented bedding technology and the addition of the 3DHEX recoil-reducing buttpad mean this is one of the most advanced lightweight stocks to date.

Spartan Precision gunsmith adapters

The forend of this stock integrates two Spartan Precision gunsmithing adapters for seamless compatibility with their ultra-light accessories.

3DHEX Recoil Reducer

Large caliber felt recoil dissipation provided in the lightest recoil reducer available. 3DHEX is a patent pending high strength energy diffusing lattice structure designed to distribute specific directional forces and reduce muzzle lift.

Cerakote®

Cerakote is the industry leading thin-film ceramic coating. The Cerakote unique formula enhances physical properties including wear, corrosion, and chemical resistance while improving impact strengths, and hardness.

FEATURES

Guaranteed Sub-Moa Accuracy

All Vanguard® rifles are guaranteed to shoot a 3-shot group of .99” or less at 100 yards (SUB-MOA) from a cold barrel when used with Weatherby® factory or premium ammunition within Two-Years of Verified Purchase Date to Original Purchaser.

TriggerTech Trigger

TriggerTech’s trigger provides true zero-creep break, extremely short over-travel, and is externally adjustable. Precision cut stainless steel components ensure consistent trigger pulls from shot to shot in a safe, reliable, and corrosion resistant package.

Accubrake ST

By adding an Accubrake ST you will significantly reduce felt recoil up to 53%. Available in four different barrel diameters, with thread protector, for a perfect brake-to-barrel contour.

54 Degree Bolt

The shortest in the industry (as compared to typical 90 bolt throw). Allows for faster chambering on follow-up shots and greater bolt-to-scope clearance.

Titanium Receiver

Titanium properties present 42% the weight of traditional steel which provides maximum weight savings for the hunter looking to save every ounce while maintaining structural integrity.

Deep Fluted Bolt

A larger radius, deeper flute not only trims a bit more weight from the bolt body of the Mark V, it also increases the smoothness with which the bolt can be cycled.

Removable Bolt Knob

Allowing for customization and utility, the bolt handle of the Mark V is now threaded to accept a variety of bolt knobs.

Carbon Fiber Stock

Sourced from Peak 44, this stock has the distinction of being the lightest production aerospace-grade carbon fiber stock on the market. Industry-leading manufacturing techniques, patented bedding technology and the addition of the 3DHEX recoil-reducing buttpad mean this is one of the most advanced lightweight stocks to date.

Spartan Precision gunsmith adapters

The forend of this stock integrates two Spartan Precision gunsmithing adapters for seamless compatibility with their ultra-light accessories.

3DHEX Recoil Reducer

Large caliber felt recoil dissipation provided in the lightest recoil reducer available. 3DHEX is a patent pending high strength energy diffusing lattice structure designed to distribute specific directional forces and reduce muzzle lift.

Cerakote®

Cerakote is the industry leading thin-film ceramic coating. The Cerakote unique formula enhances physical properties including wear, corrosion, and chemical resistance while improving impact strengths, and hardness.

TECH SPECS

*As of 01/01/2024 the twist rate for .240 WBY MAG and .243 WIN was updated from 1:10 to 1:7.5

Caliber
Weight
Overall Length
Mag capacity
Barrel Contour
Barrel Threads
Barrel OAL
Twist Rate
Length of Pull
Drop @ Comb
Monte Carlo
Drop @ Heel
.240 WBY MAG5.2lbs.42“4+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:7.5“13.5“.625“N/A.30“
.243 WIN5.2lbs.42“4+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:7.5“13.5“.625“N/A.30“
.257 WBY MAG5.9lbs.44“3+1#4 CARBON5/8-2426" (24" barrel + 2" muzzle brake)1:10“13.5“.625“N/A.30“
.280 ACKLEY IMPROVED5.2lbs.42“4+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:9“13.5“.625“N/A.30“
.300 PRC5.7lbs.42“3+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:10“13.5“.625“N/A.30“
.300 WBY MAG5.9lbs.44“3+1#4 CARBON5/8-2426" (24" barrel + 2" muzzle brake)1:10“13.5“.625“N/A.30“
.300 WIN5.7lbs.42“3+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:10“13.5“.625“N/A.30“
.308 WIN5.1lbs.40“4+1#4 CARBON5/8-2422" (20" barrel + 2" muzzle brake)1:10“13.5“.625“N/A.30“
6.5 CREEDMOOR5.2lbs.42“4+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:8“13.5“.625“N/A.30“
6.5 WBY RPM5.2lbs.42“4+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:8“13.5“.625“N/A.30“
6.5-300 WBY MAG5.9lbs.46“3+1#4 CARBON5/8-2428" (26" barrel + 2" muzzle brake)1:8“13.5“.625“N/A.30“
7MM PRC5.7lbs.42“3+1#4 CARBON5/8-2424" (22" barrel + 2" muzzle brake)1:8“13.5“.625“N/A.30“
Caliber
Weight
Overall Length
Mag capacity
Barrel Contour
Barrel OAL
Twist Rate
Length of Pull
Drop @ Comb
Monte Carlo
Drop @ Heel
.240 WBY MAG
5.2lbs.
42“
4+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:7.5“
13.5“
.625“
N/A
.30“
.243 WIN
5.2lbs.
42“
4+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:7.5“
13.5“
.625“
N/A
.30“
.257 WBY MAG
5.9lbs.
44“
3+1
#4 CARBON
26" (24" barrel + 2" muzzle brake)“
1:10“
13.5“
.625“
N/A
.30“
.280 ACKLEY IMPROVED
5.2lbs.
42“
4+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:9“
13.5“
.625“
N/A
.30“
.300 PRC
5.7lbs.
42“
3+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:10“
13.5“
.625“
N/A
.30“
.300 WBY MAG
5.9lbs.
44“
3+1
#4 CARBON
26" (24" barrel + 2" muzzle brake)“
1:10“
13.5“
.625“
N/A
.30“
.300 WIN
5.7lbs.
42“
3+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:10“
13.5“
.625“
N/A
.30“
.308 WIN
5.1lbs.
40“
4+1
#4 CARBON
22" (20" barrel + 2" muzzle brake)“
1:10“
13.5“
.625“
N/A
.30“
6.5 CREEDMOOR
5.2lbs.
42“
4+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:8“
13.5“
.625“
N/A
.30“
6.5 WBY RPM
5.2lbs.
42“
4+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:8“
13.5“
.625“
N/A
.30“
6.5-300 WBY MAG
5.9lbs.
46“
3+1
#4 CARBON
28" (26" barrel + 2" muzzle brake)“
1:8“
13.5“
.625“
N/A
.30“
7MM PRC
5.7lbs.
42“
3+1
#4 CARBON
24" (22" barrel + 2" muzzle brake)“
1:8“
13.5“
.625“
N/A
.30“

Mark V® Backcountry Guide Ti Videos

Additional information

WeightN/A
DimensionsN/A
Caliber

, , , , , , , , , , , , , , , , ,

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Select options This product has multiple variants. The options may be chosen on the product page Quick View

    Mark V® Weathermark LT

    NO LONGER IN PRODUCTION

    Weighing a mere 5.9 pounds for a 6-lug Action, or 7.2 pounds for a 9-lug Action, SUB-MOA accuracy, and durable performance finish, this rifle is home in any backcountry situation.

    FINISH

    Fluted Barrel / Brake / Receiver / Trigger Guard – FDE Cerakote
    Bolt / Bolt Knob / Safety – Graphite Black Cerakote
    Green Hand-Laid, raised comb Monte Carlo fiberglass stock with FDE speckle pattern.

    TECH SPECS

    View Tech Specs

    Select options This product has multiple variants. The options may be chosen on the product page
  • Select options This product has multiple variants. The options may be chosen on the product page Quick View

    Mark V® Backcountry

    NO LONGER IN PRODUCTION

    Whoever said that “looks are deceiving” must have been talking about me. With my Kryptek® Altitude™ camo I deceive the eyes of wary big game animals like no other Mark V. *Accubrake varies on caliber.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Select options This product has multiple variants. The options may be chosen on the product page Quick View

    Mark V® Carbonmark Pro

    $3,199.00 – $3,299.00

    The Mark V® CarbonMark is a custom built, stunningly-precise rifle ready for any adventure. This carbon barrel is lightweight, accurate, and fast-cooling.

    FINISH

    Receiver / Brake / Trigger Guard – Tungsten Cerakote
    Bolt / Bolt Knob / Safety – Graphite Black Cerakote
    Stock – Charcoal finish carbon fiber stock

    TECH SPECS

    View Tech Specs

    Select options This product has multiple variants. The options may be chosen on the product page